Echo Trimmer GUIDE BAR AND SAW CHAIN REPLACEMENT, Guide Bar Replacement / Installation, Saw Chain Installation

POWER PRUNERTM ATTACHMENT

OPERATOR'S MANUAL 17

GUIDE BAR AND SAW CHAIN REPLACEMENT

WARNING DANGER

Never try to replace or adjust guide bar and saw chain with engine running. This saw chain is VERY sharp, wear heavy gloves to protect your hands when handling it. Wear eye protection meeting CE or ANSI specification Z87.1.

Guide Bar Replacement / Installation

Level 3

Tools Required: 10 mm (13/32 in.) Wrench, Screwdriver

•Remove two (2) 10 mm (13/32 in.) guide bar nuts (A) and relieve saw chain tension turning screw (B) counter clockwise.

•Remove sprocket cover.

•Free saw chain from sprocket and remove from guide bar. If guide bar is okay proceed to saw chain installation.

•Slide guide bar forward and remove from cutting attachment. Install new guide bar sliding it onto the cutting attachment as far as possible.

•Turn saw chain adjustment screw until adjusting pin (C) fits into round hole in guide bar.

Saw Chain Installation

Level 3

•Install new saw chain onto guide bar. Make sure cutting links are faced towards the nose of the guide bar.

•Engage saw chain with sprocket.

•Secure sprocket cover with (2) two guide bar nuts.

•Follow instruction for adjusting saw chain tension page 12.

A

B

C