10 
discharge hose
Garden Hose
NOTE
Garden hose ranging from 13 mm (1/2 inch) to 19 mm (3/4 inch) in diameter can be used on the discharge end of this pump.
1. Remove vinyl cap from pump discharge port.
2. Attach the 25 mm to 3/4 inch adaptor (H) and washer (E) tightly onto pump discharge port.
3. Attach garden hose onto adaptor (H).
1 inch discharge hose
NOTE
Rubber or fabric hose may be used. Hose can be obtained from local contractor supply companies. Extra fittings are included with the pump.
1.Assemble clamp (B), hose connecter (C), hose fitting (D) and seal- ing washer (E) as shown for suction hose.
2.Attach hose onto discharge port. When 1 inch discharge hose is used, 25 mm to 3/4 inch adaptor (H) is not required.
H 
B C
E
D E
