How to operate the receiver with an optional DSP/EQ unit connected
[AUDIO CONTROL] button | Buttons [1] to [6] |
2.Tap button [AUDIO CONTROL] to select the desired mode of adjustment.
The mode sequence on the button is as follows:
Level•Duration value
LR○○○dB (Reverberation level)*
LR○○○S (Reverberation duration)*
ER○○○dB (Initial echo level)
ER○○○mS (Initial echo delay)
*The level and duration adjustments are available in CONCERT and CATHEDRAL modes only.
3.Turn the [AUDIO CONTROL] button.
This button adjusts the reverberation level and duration. Right: Increases the value.
Left: Decreases the value.
4.Hold down a button, [1] to [6], for more than two seconds to preset a value.
The preset value is overwritten by the value set using the above steps.
Direct (original sound)
Reverberation duration
High
Initial echo]
Level
Time | Long |
Initial echo delay | Reverberation |
55
