Fine-tuning EQ functions | Eclipse - Fujitsu Ten 54420 specs

How to operate the receiver with an optional DSP/EQ unit connected

[AUDIO CONTROL] button

Buttons [1] to [6]

[FUNC] button

Fine-tuning EQ functions

1.After pressing the [FUNC] button, hold button [2] down for more than one second.

The EQ adjustment mode starts.

2.Tap button [2] until the desired equalizer mode is displayed.

3.Tap the [AUDIO CONTROL] button to switch frequencies.

The frequencies will switch in the following sequence:

63Hz 125Hz250Hz500Hz 1kHz4kHz 12.5kHz

4. Turn the [AUDIO CONTROL] button to adjust the level.

Right	:Increases the value.
Left	:Decreases the value.

5.Hold down a button, [1] to [6], for more than two seconds to preset a value.

The preset value is overwritten by the value set using the above steps.

6.Push the [FUNC] button.

This cancels the adjustment mode. The selected value will now take effect.

58

Image 58

Eclipse - Fujitsu Ten 54420 owner manual Fine-tuning EQ functions

Contents

By Fujitsu TEN For your safety in using Page Page Table of Contents How to operate the tuner If you have a question Operating Precautions About compact discs Okay About cleaning a CD Names of controls and parts Front View How to program the Key CD ESN Key CD security operating procedureInsert the CD into the slot How to cancel the Key CD Insert your Key CD into the slot First, cancel the existing Key CD How to change the Key CDNext, program a new Key CD How to resume normal operation ESN security lock out What happens if an incorrect CD is inserted? How to turn the Security indicator on/off How to Read the Electronic Serial Number Listening to a CD Turning the power on and offBasic operation Press the PWR button Press the FM AM button Listening to the tunerPress the button to tune to a station Displaying the clock Adjusting audio volumeTurn the Audio Control button to the left or right Disabling the guide tone feature for button operation Others Setting the clock Switching audio control modes Enabling the loudness control Enabling E-COM feature Switching Non-Fader modesDisabling the Tone Control Cancel feature Disabling the display Listening to CDs How to operate the CD playerPress the CD button Press the button Playing the beginning of tracks ScanPress button 4 Scan Repeating the same track Repeat Switching the displayPlaying tracks in random order Random Ejecting the disc Press the （EJECT） button Displaying a genre for a CDs Tuning to a station How to operate the tunerTap the FM AM button to switch to the desired FM or AM mode Each tap switches modes from FM1 → FM2 → FM3 → AM Manually setting stations into memory Preset station scan Press the ASM button FM reception characteristics FM Reception Differs from AM Reception Area of FM Broadcasts Multipath How to use the Card remote control Precautions in use of the remote control Switching playback modes Turning the power on/offAdjusting the audio volume Cutting the volume instantly muting Select the FM/AM band How to play the tunerSelecting preset stations Select a station manually or automatically Switching disc modes How to play CDsSkipping to the next or previous CD Replacing the battery How to use an optional NOB remote control Band button Band Mode Mode button Tune . Seek buttons Press the Track button Button Skips to the next track Illuminating the NOB remote control Enabling the optional E-COM feature Replacing the battery Two new batteries ・Use only two of the same kind of battery Basic operation Listening to a CD Repeating the same track Repeat Playing the beginning of tracks ScanPlaying tracks in random order Random Specifying a CD to play Disp button Button1 Switching room sizes How to operate the DSP functionsAfter pressing the Func button, tap button Fine-tuning an individual roomsize mode Initial echo delay Reverberation Retrieving a preset pattern from memory How to operate the EQ functions Switching equalizer modes Fine-tuning EQ functions Retrieving an equalizer mode from memory If you have a question Displaying information For troubleshooting Mechanically MUTE? Or, the disc cannot be Specifications General CD Section Setting the system-selector switch Before InstallationComponents Mounting instruction Mounting the main unit Install the bezel on the main unit Names of lead wires and destinations Refer to Mounting instruction System Red Yellow Blue Orange/White Blue/White Black Mounting instruction Mounting instruction Record Your KEY CD HERE… Customer Notice