Eclipse - Fujitsu Ten CD2000 manual Listening to CD MP3 file, Switching to the CD player mode

Operation

Listening to CD (MP3 file)

Insert a CD into the disc slot, label

1 side up.

The CD will immediately start playing.

ATTENTION

When a CD is already loaded, press the [DISC] button to switch to the CD mode.

● Note ●

•When music data recorded in the normal way (CD-DA) is present on the same disc with MP3 music files, the normally recorded music data will be played. To listen to the MP3 music files, press the button [3] for more than one second.

•The optional CD changer cannot be used to play MP3 files.

Switching to the CD player mode

First press the [DISC] button for less than one second to switch to the disc mode. It is assumed here that a CD has already been loaded into the unit.

Press the [DISC] button for less

1 than one second to switch to the CD player mode.

This starts CD play.

If an external CD changer and iPod is connected, each additional press of the [DISC] button will switch modes from CD player ➔ CD changer 1 ➔ CD changer 2 ➔ CD player.

A changer or player with no discs loaded will be skipped.

ATTENTION

•Playback may be intermittent when there is a scratch on a CD or when the recorded side is dirty.

•Only two external CD changers may be connected.

16