Svenska Nederlands Italiano Français Español English Deutsch

Names and functions of terminals

•Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result.

•The cables should be secured with tape or a similar securing method to prevent any obstructions while driving. If they get wound or entangled around components such as the steering wheel, shifting lever, or brake pedal, accidents may result.

•If removing the end of the cord to connect to another cord, be sure to wrap PVC tape or a similar wire insulating method around the connection to insulate it. If the connection is not insulated, fire or accidents may result.

1 MAIN UNIT

ANTENNA PLUG

 

 

E

 

16P

D

A

 

C

 

 

 

 

B

2 INTERCONNECTING CABLE

4

 

(Power and speaker connector)

 

 

 

Tip*1

3

 

1

TO VEHICLE-SIDE

 

2

CONNECTOR

Tip*1

•The positions of the B+ and ACC pins on the connector may vary depending on the vehicle. In such cases, replace the end of the connector. Ask your dealer for details on connector pin positions.

Tip

•This illustration shows the CD8445E. The CD5425E differs slightly from this illustration.

•Refer to page 5 for details on the wire colours and connection points for interconnecting cables 2 .

• Refer to page 5 for details on connection points A to E for the main unit cables and terminals.

- 4 -