- Main unit installation example (If installing the main unit using the side brackets of the vehicle) -

Tip

•Carefully bind any excess length of cord that is connected to the main unit and secure it to an area of empty space in the vehicle so that it does not move around or get caught in the main unit or vehicle-side equipment. If the cords are not handled correctly, operating problems or short- circuits may occur, and this may result in the danger of fire or other accidents.

•Connect all cables before installing the main unit.

1Remove the pocket and any other accessories from the centre cluster to make room for the main unit.

2Remove the mounting brackets for the pocket.

3Attach the brackets to the main unit.

Tip

Be sure to use the supplied accessory mounting screws (Red:M5 x 8) as the mounting screws. If any other screws are used, they may damage the inside of the unit.

4Install the main unit in the vehicle.

Centre cluster panel

Pocket, etc

Mounting bolts

1 Main unit

6 Hex-head bolt (Red:M5 x 8) x 4

Screw x 4

Pocket

Mounting bracket

Svenska Nederlands Italiano Français Español English Deutsch

Tip

•Be careful not to forcefully push on the main unit's display or buttons during installation. This may result in damage to the main unit.

•This installation method is only one example. When installing the main unit to the vehicle, be sure to as the place of purchase for information on what installation method to use.

6

Hex-head bolt

7

Flat head

(Red:M5 x 8) x 4

 

screw

(Red:M5x8) x 4

Select the screws in accordance with the shapes of the screw holes in the mounting bracket.

- 8 -