LOGIC MODULE STATUS LIGHTS & PUSH-BUTTONS

Remote Display Unit

The remote display with keypad allows remote reset and activation of the history log option. It is panel mountable and features a back- lit liquid crystal display in a 1/4 DIN housing. It connects to the Bi- Flame by a six or ten foot cable.The display incorporates the fol- lowing features:

1)Provides status messages for the Bi-Flame sequence. (See Sec- tion 10)

2)Indicates lockout conditions when they occur, as well as the amount of time into the sequence when the lockout occurred and the amount of time elapsed from lockout.

3)Provides continuous monitoring of each burner’s flame signal strength during main burner operation. (Pressing ENTER once will lock on a particular burner’s status; pressing ENTER a sec- ond time will resume scrolling).

4)Incorporates a remote reset key.

5)Provides the interface required for the History Log.

6)Incorporates keys for pilot test mode.

RS232 Communication Interfaces (RS485 optional)

Terminals 1, 5, and 6 on Bi-Flame terminal strip J7 provide a serial ASCII output communication interface for remotely monitoring the system sequence and status using a terminal or a modem; refer to Section 10 for the types of messages sent by the Bi-Flame.

The communications protocol is 8 bit, no parity, 1 stop bit and1200 baud. This feature is provided standard as a RS232 interface.The RS485 interface is optional.

Sending a carriage return (<CR> = ASCII Hex 0D) from the terminal causes the Bi-Flame to retransmit the last message. Sending a CTRL- E (<ENQ> = ASCII Hex 05) accesses the optional history log.

The logic module provides all the sequential logic, and safety start- up and shutdown circuitry. On the front of the module is the reset, scan and enter push-buttons, and status lights.This section de- scribes the their respective functions.

Limits

This LED illuminates when the operation limits are made.These limits are wired in series to terminal J1-1.This input becomes energized to begin the burner sequence.When in the test mode, this LED flashes (see “Pilot Test Mode” on page 15).

Eclipse Bi-Flame v1.8, Instruction Manual 826, 05/03

19

 

Page 18 Page 20
Page 19
Image 19
Eclipse Combustion 6500 instruction manual Remote Display Unit, RS232 Communication Interfaces RS485 optional, Limits
Page 18 Page 20

6500 specifications

The Eclipse Combustion 6500 is a cutting-edge industrial burner designed to optimize combustion efficiency and reduce emissions in various applications. Known for its innovative approach to fuel burning, the 6500 model combines advanced technology with robust engineering, making it a preferred choice for industries such as power generation, manufacturing, and petrochemicals.

One of the hallmark features of the Eclipse Combustion 6500 is its versatility to operate on multiple fuels, including natural gas, propane, and biogas. This flexibility allows companies to adapt to changing fuel availability and cost, ensuring operational efficiency and economic viability. The burner is designed with a range of firing rates, catering to both small and large-scale applications, which enhances its utility across diverse operational scenarios.

Another significant characteristic of the 6500 is its sophisticated control system. The burner employs advanced digital controls that enable precision in fuel-to-air ratios and overall combustion management. This technology not only optimizes thermal performance but also facilitates compliance with stringent emissions regulations. By continuously monitoring combustion conditions, the 6500 ensures maximum efficiency while minimizing harmful emissions of nitrogen oxides (NOx) and carbon monoxide (CO).

Moreover, the Eclipse Combustion 6500 features a unique combustion geometry. This design promotes a stable flame while maintaining excellent mixing of fuel and air. The result is improved combustion efficiency and a reduction in pollutant formation. The structural integrity of the burner is engineered to handle high temperatures and corrosive environments, ensuring long-term reliability and reduced maintenance needs.

Safety is a paramount consideration in the design of the 6500. Integrated safety systems monitor operational parameters and provide alerts to prevent unsafe conditions. This focus on safety, combined with high performance, ensures that the burner not only meets but exceeds industry standards.

In summary, the Eclipse Combustion 6500 stands out due to its versatility, advanced control technologies, and efficient combustion capabilities. Its design prioritizes safety, reliability, and compliance with environmental regulations, making it an ideal choice for various industrial applications. As industries strive for greener and more efficient operations, the 6500 is poised to play a pivotal role in the evolution of combustion technology.
Top Page Image Contents