Never remove ice with a sharp object or screwdriver.

Defrosting and Deodorizing

When the ice layer on the inner cabinet sides is over 0.2”, the defrosting operation should be performed to improve the refrigerating efficiency. To do this, follow these steps below:

1. Turn off the power, and remove all items located within the chest.

2. Allow the ice to completely melt.

3.Remove the drain plug and drain all water. Once the unit is defrosted and all the water has drained out, clean the interior with a soft rag before using the unit.

Tip: To remove bad odors place a piece of charcoal in the chest

Proper Location

xPosition your portable freezer in a location where there is proper air circulation and electrical connections.

xKeep the portable freezer away from heat and direct sunlight if possible.

xThis portable freezer is suitable for car use and camping however, the appliance should not be exposed to rain.

xThis portable freezer should not be placed in a built-in or recessed area. It is designed to be freestanding.

xThe normal operation of the freezer depends on heat radiation from the condenser. For the initial use, remove all packaging and allow at least 6” of room around the freezer.

Because this unit is compressor based, ample space is required around the unit to allow it to exhaust properly.

Normal Operating Sounds and Functions

It is normal to hear gurgling sounds caused by the flow of refrigerant when each cooling cycle ends.

The surface temperature of the compressor can reach 158-194°F when running.

The noise emitted by the cooling fan on the condenser is a normal function.

It is normal for the fan in the power supply to run all the time.

CLEANING YOUR

PORTABLE FREEZER

Always disconnect the power supply before cleaning. Clean the inside of the cabinet whenever necessary using a solution of warm water and baking soda (1 tablespoon to every 2 liters of water). Dry with a soft cloth.

Do not use steel brushes or aggressive detergents to clean the inner liner.

8

Movement and Installation Instructions

1.Remove all interior and exterior packaging.

2.Position the freezer in a dry and well-ventilated place. Keep the freezer away from direct sunlight, heaters and corrosive gas.

3.Clean the interior surface with a little bit of lukewarm water and a soft cloth.

4.When inserting the AC power-cord into the power socket, make sure the power socket is a grounded 115V~AC / 60Hz socket. Also make sure that the unit’s grounding prong has not being tampered with.

Note: When inserting the DC power-cord, make sure the input is a 12V DC / 24V power source.

5.When moving the freezer, always use both handles to the carry the unit as level as possible. This is in order to protect the compressor and the sealed system.

5

Page 5 Page 7
Page 6
Image 6
EdgeStar FP430-FP860 manual Cleaning Your Portable Freezer, Defrosting and Deodorizing, Proper Location
Page 5 Page 7

FP430-FP860 specifications

The EdgeStar FP430-FP860 is designed for efficiency and performance, catering to those who require a reliable cooling solution for both residential and commercial use. This product is especially notable for its remarkable capacity and innovative technologies that make it stand out in the crowded market of portable freezers and refrigerators.

One of the main features of the EdgeStar FP430-FP860 is its impressive energy efficiency. Equipped with advanced compressors, it delivers optimal cooling performance while consuming minimal energy. This feature is particularly beneficial for users who need to operate the unit for extended periods, such as during camping trips or in RVs. The unit’s energy-saving design not only reduces electricity bills but also minimizes the carbon footprint, making it an eco-friendly option.

The FP430-FP860 boasts a substantial capacity, offering ample space for food and beverages. With adjustable shelves and a versatile interior layout, users can customize the storage space to accommodate various items, from large containers to smaller snacks. This flexibility is ideal for outdoor enthusiasts who might need to store a wide range of food items in one place.

In terms of technology, the unit features rapid cooling capabilities, allowing for quick temperature adjustments. Users can set their desired temperature and achieve optimal cooling in a fraction of the time compared to traditional models. Additionally, the digital thermostat and LCD display enhance the user experience by providing real-time temperature readings and easy control over settings.

The build quality of the EdgeStar FP430-FP860 also deserves mention. Its rugged design is built to withstand the harsh conditions often associated with outdoor use. With a durable and insulated construction, the unit is designed to retain cold air efficiently, even in high ambient temperatures. This makes it an ideal choice for outdoor adventures or any situation where reliable cooling is a necessity.

Finally, the EdgeStar FP430-FP860 is equipped with multiple power options, including AC, DC, and solar compatibility. This versatility ensures that users can keep their food and beverages cold, regardless of the power source available. Whether plugged into a wall outlet or charged using solar power, this freezer provides flexibility that is essential for off-grid activities.

Overall, the EdgeStar FP430-FP860 combines energy efficiency, ample storage space, quick cooling technology, and robust construction, making it a top choice for anyone in need of a reliable portable freezer or refrigerator. Whether for camping, tailgating, or everyday use, this unit meets diverse cooling needs with ease and durability.
Top Page Image Contents