EdgeStar IB1500SS, IB1000SS, IB650SS owner manual Descriptions of LEDs and buttons, Major Functions

Control Panel (Inside of the front panel)

Descriptions of LEDs and buttons:

1. Ice Full (Red) LED: Ice Full indicator light.

When this LED is lit, the ice storage bin is full of ice or there is something obstructing the ice-full probe. The unit will stop working. When ice cubes are taken out of the ice storage bin, clearing the ice-full probe, the red LED will keep flashing for 3 minutes.

Then the unit will restart and return to the ice making mode.

2. Ice Making (Green) LED: Ice Making indicator light.

When this LED is lit, the unit is working in the Ice Making mode controlled by a temperature probe on the evaporator. When the green LED is flashing, the unit is working in the Ice Making mode controlled by a fixed timer.

3. Ice Harvest (Yellow) LED: Ice Harvest indicator light.

When this LED is lit, the unit is working in the Ice Harvest mode controlled by a temperature probe on the evaporator. When the yellow LED is flashing, the unit is working in the Ice Harvest mode controlled by a fixed timer.

4.Clean button: When this button is pressed, the unit enters the Cleaning mode. The green and yellow LEDs flash together. To stop the Cleaning mode, just press the button again.

5.Mode button: Mainly for service. When this button is pressed, unit can change from Ice Making mode to Ice Harvest mode, or from Ice Harvest mode to Ice Making mode. You can judge the mode from the status of the green and yellow LEDs.

6.Ice size adjust: Turn the screw clockwise, and the size of the individual ice cubes will be larger in the next cycle; the cycle time will be longer. Turn the knob counter-clockwise, and the ice size will be smaller in the next cycle. Note: It is not recommended that the ice size be adjusted after installation.

IMPORTANT:

•It is not recommended that the ice size be adjusted unnecessarily since this could damage the machine’s controls.

•Do not let water contact the control box.

•If the red, green and yellow LEDs are flashing together, the machine is not working. The major fuse of the control box has failed. Call for service.

Major Functions

1.Completely automatic operation.

2.When the ice storage bin is full, the machine stops making ice automatically and starts again after the cubes are removed.

3.The different colors of the LED display indicate various operating modes.

4.The fan motor responds to the ambient temperature. If it is cold, the motor will stop working to keep the cooling system in good working condition.

5.Ice cube size is adjustable.

6.A sensitive probe and accurate timer enhance the performance of the ice maker.

7.Built-in compressor protection system.

15