Adjusting the Temperature
Note: Whether your mini kegerator can reach the actual set temperature depends on the ambient environmental conditions.
This mini kegerator has a temperature range from 38°F to 54°F.
Press the button on the control panel to lower the temperature by 1 degree increments.
Allow at least 24 hours before storing your keg and to allow the temperature to acclimate.
Press the button on the control panel to increase the temperature by 1 degree increments.
TROUBLESHOOTING
Before Calling for Help
If the unit appears to be malfunctioning, read through the manual first. If the problem persists, check the Troubleshooting Guide below. The problem could be something that can easily be solved or explained.
Issue | Possible cause | Solution | |
| There is a power failure. | Ensure the power outlet has power by testing with another | |
| appliance. | ||
|
| ||
The mini kegerator does | The kegerator is not plugged | Plug the unit in to a power outlet that has sufficient power. | |
in. | |||
| |||
not turn on. |
|
| |
A house fuse has blown or | Replace the broken fuse in your fuse box or reset the | ||
| |||
| the circuit breaker is tripped. | breaker. | |
|
|
| |
| The mini kegerator is placed | Keep the mini kegerator away from direct sun light or | |
| too close to a heat source. | other heat sources. | |
The mini kegerator will |
|
| |
The mini kegerator does not | Make sure there is 3” of ventilation room all around the | ||
not reach the desired | |||
have sufficient ventilation. | unit. | ||
temperature | |||
|
| ||
| The door is opened too | Close the door and do not open the door too frequently or | |
| frequently or for a long | ||
| for a long period of time. | ||
| period of time. | ||
|
| ||
|
|
| |
|
| Make sure the dispenser handle is pinching the rubber | |
The faucet is leaking. | Hose not properly installed. | hose. Remove the side access door to access the hose | |
|
| that leads to the dispenser. | |
|
|
| |
While using the optional | Rubber ring is not installed | Make sure the rubber ring is installed. | |
on piercing tube | |||
| |||
accessory kit, CO2 is |
|
| |
Defective CO2 Piercing |
| ||
leaking. | Contact customer service. | ||
| Adapter or missing gasket | ||
|
| ||
|
|
|
13