General instructions
Regardless of the brand of
1.Chill your keg- although this mini kegerator has a cooling plate that will cool your keg, best results will come from a keg that is already cooled to drinking temperature- this way, the cooling plate only has to keep your keg cool.
2.Follow the instructions on the mini keg to eliminate excess gas or pressure.
3.Connect the beer line to the correct dispenser head and tap the keg (use the included head for Heineken brand DraughtKeg™ 5 Liter mini kegs; use the optional head for all other brands)
4.Connect the gas lines (if using the optional head for non- pressurized 5 Liter mini kegs)
5.Try a test pour to ensure that the beer is flowing freely. If the test pour is good, then you may begin to enjoy!
Note that you may experience a lot of foam shortly after tapping the mini keg. If you wait
To put the mini keg into the mini kegerator:
1.Open the mini kegerator door by depressing the button located on the upper
2.Gently put the mini keg on the cold plate. You may find it helpful to hook the line(s) up to the mini keg while it is slightly outside the unit.
To turn the light on and off:
1.If the light is off press the light button to turn on the light.
2.If the light is on press the light button to turn the light off.
EdgeStar Mini Kegerator | 4 |
