Dynamic DNS
Service Use this to Enable/Disable the Dynamic DNS feature, and select the required
service provider.
• Disable – Dynamic DNS is not used.
• TZO – Select this to use the TZO service (www.tzo.com). You must configure
the TZO section of this screen.
• Standard Client – Select this to use the standard service (from
www.dyndns.org or other provider). You must configure the Standard Client
section of this screen.
• 3322(in China) – This is available in China. It is similar to “Standard client”
• User Defined DDNS Server – This is the user define DDNS server. If the
DDNS other than TZO, dyndns.org and 3322.
Additional
Settings
These options are available if using the standard client.
• Enable Wildcard – If selected, traffic sent to sub-domains (of your Domain
name) will also be forwarded to you.
• Enable backup MX – If enabled, you must enter the Mail Exchanger address
below.
• Mail Exchanger – If the setting above is enabled, enter the address of the
backup Mail Exchanger.
WAN Port
Binding Select the WAN port on which the Dynamic DNS is used. The "Force Update"
button will update your record on the Dynamic DNS Server immediately
Page 39