Partition LED is lit | Edimax Technology ER-5398S specs

5. Partition LED is lit

•Check the connected devices. The hub will automatically partition a defective Ethernet device which causing excessive errors.

•Remove all the network cables; connect the cables back one by one to isolate the source of the collision.

•Check the network cable, inferior cable quality will result in excessive collision and error packets.

•Check the connected devices. Remove all the network cables; connect the cables back one by one to isolate the source of the jabber.

Image 13

Contents

Ethernet Hub FCC Compliance Statement Contents ER-5398S Topology Introduction Features Features & SpecificationsSpecification Package Contents Panel Physical Description LED LED Connecting to network devices with UTP cable InstallationOperating Environment Uplink to Another Hub with UTP cable DIP Switch for Connecting network devices with coaxial cables Connect the power Connecting the power Power LED is not lit Trouble-shootingAUI/BNC ports do not transmit Partition LED is lit Contact your dealer if problem persistCollision LED is constantly flashing Jabbler LED is constantly flashing