Connecting the power | Edimax Technology ER-5398S instruction

5. Connecting the power

Connect the power cord to the power socket on the rear panel of the unit. Connect the power cord to the power outlet and turn on power switch. The green Power LED on the front panel should be lit.

BNC 2

AUI 2

BNC 1

AUI 1

100-240VAC 1A

Power

Figure 5-5 Connect the power

Page 11

Image 11

Edimax Technology ER-5398S user manual Connecting the power, Connect the power

Contents

Ethernet Hub FCC Compliance Statement Contents ER-5398S Topology Introduction Specification Features & SpecificationsFeatures Package Contents Panel Physical Description LED LED Uplink to Another Hub with UTP cable InstallationConnecting to network devices with UTP cable Operating Environment DIP Switch for Connecting network devices with coaxial cables Connect the power Connecting the power AUI/BNC ports do not transmit Trouble-shootingPower LED is not lit Jabbler LED is constantly flashing Contact your dealer if problem persistPartition LED is lit Collision LED is constantly flashing