Air Comm Systems 33-1196 owner manual

Models: 33-1196

1 8
Download 8 pages 44.02 Kb
Page 4
Image 4

Connecting to an Audio Source

."%#76+10".

Do not connect the transmitter to your audio source’s speaker output. Doing so could damage the transmitter and audio source.

7.The batteries automatically begin charging and the transmitter’s CHARGE indicator lights green.

Before using your headphones for the first time, you must charge the batteries for at least 24 hours. When the batteries have been completely discharged, it takes about 12 hours to completely recharge the batteries.

When charging is complete, unplug the charge cord. The CHARGE indicator turns off.

4'%;%.+0)"0+/%&"$#66'4+'5 The EPA certified RBRC®Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates RadioShack is voluntarily participating

in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-THE-SHACK (1-800- 843-7422) for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. RadioShack’s involvement in this program is part of the company’s commitment to preserving our environment and conserving our natural resources.

%100'%6+0)"61"#0"#7&+1" 5174%'

You can connect the transmitter to your audio source’s left and right audio output jacks or the headphone jack. .

1.Connect one end of the supplied audio patch cord to the transmitter’s audio jacks (white plug to L AUDIO IN and red plug to R AUDIO IN).

2.If you are using the audio source’s output jacks, connect the white and red plugs at the other end of the patch cord directly to the audio source’s corresponding left (white) and right (red) audio jacks.

If you are using your audio source’s stereo headphone jack, connect the patch cord’s white and red plugs to the white and red phono jacks on the Phono to 1/8-inch supplied adapter.

3.If your audio source has a 1/8-inch headphone jack, insert the adapter’s 1/8-inch stereo plug into the audio source’s HEADPHONE jack.

4

Page 4
Image 4
Radio Shack 33-1196 The batteries automatically begin charging and the transmitter’s CHARGE indicator lights green