Air Comm Systems 33-1196 #4)+0)"4'%*#4)'#$.'" $#66'4+'5, DC IN 4.5V, 1/ 8 to 1/ 4 inch, Stereo Adapter

If the headphones’ range decreases, you do not hear sound from the audio source, or the headphones’ POWER/BATT LOW indicator is blinking, replace the alkaline batteries or recharge the rechargeable batteries. Rý

%*#4)+0)"4'%*#4)'#$.'" $#66'4+'5

Your transmitter has a built-in charger to charge rechargeable batteries. When the headphones are not in use, the rechargeable battery can be continuously charged over several days. The batteries can be charged with the transmitter set to on or off.

1.Turn off the headphones and remove the battery compartment cover on the left earpiece. #"

2.Select ALK/RCH to RCH.

3.Place the rechargeable batteries in the compartment according to the polarity symbols (+ and –) marked in the compartment.

4.Replace the cover.

5.Lift the charging compartment cover on the back of transmitter to open and pull out the charging cord. .#

DC IN 4.5V

Charging

Cord

Red

DC IN 12V White

1/8 to 1/4 inch	Phono to 1/8 inch
Stereo Adapter	Stereo Adapter

6.Plug the charging barrel plug into the DC IN 4.5V jack on the left earpiece.

R"9#40+0)ýR"

Dispose of old batteries promptly and properly. Do not burn or bury them.

#"+/2146#06"#

You can only charge rechargeable batteries. Do not attempt to charge alkaline batteries.

."%#76+10".

The charging compartment cover on the transmitter is hinged. Do not attempt to remove it.

Charging Rechargeable Batteries

3