54
Fig. 4-4 Port Configuration
4-2-3. VLAN Mode Configuration
The switch supports Port-based VLAN and Tag-based VLAN (802.1q).
Support 24 active VLANs and VLAN ID 1~4094. VLAN configuration is used to
partition your LAN into small ones as your demand. Properly configuring it, you can
gain not only improved security and increased performance but also greatly reduced
VLAN management.
Function name:
VLAN Mode Setting
Function description:
The VLAN Mode Selection function includes four modes: Port-based, Tag-
based, Metro mode or Disable. You can choose one of them by pulling down
list and pressing the <Downward> arrow key. Then, click <Apply> button, the
settings will be in effect immediately.
Parameter description:
VLAN Mode:
Port-based:
Port-based VLAN is defined by port. Any packet coming in or
outgoing from any one port of a port-based VLAN will be accepted.
No filtering criterion applies in port-based VLAN. The only criterion
is the physical port you connect to. For example, for a port-based
VLAN named PVLAN-1 contains port members Port 1&2&3&4. If
you are on the port 1, you can communicate with port 2&3&4. If you
are on the port 5, then you cannot talk to them. Each port-based
VLAN you built up must be assigned a group name. This switch can
support up to maximal 24 port-based VLAN groups.