7. Click on Restart to take the new settings effect.
Now the installation is complete. You can connect the adapter to a network device by an Ethernet cable:
1.Connect an Ethernet cable to the Ethernet port on the adapter.
2.Connect the other end of the Ethernet cable to your network hub, switch or router.
The Link LED should light up green to indicate a proper physical connection between the adapter and the network. If the Link LED doesn’t light up, please verify the cable connections between all the network devices.
*Actual strings depend on your operation system. These screen shots are from Mac OS X v10.4 and might vary slightly for each operation system.
8
