33

Recording

The R-09 can use a dynamic microphone or a condenser microphone, such as the type that
are connected to the microphone jack of a PC.

fig.conmic-LR-e.eps_80

If a cable is connected to the [LINE IN Jack], then the input from the [MIC Input Jack] is ignored.
Do not connect anything to the [LINE IN Jack].
To prevent feedback when recording with a microphone, do not use speakers.

fig.power-onoff-e.eps_80

1.

Turn on power to the R-09.

Turn on power to the R-09. See “Turning power on/off” (p.
14)

2.

Set the sampling frequency.

“Configuring recording” (p. 26)

fig.open-set-e.eps_80

1. Show the <Menu Screen>.

Press and hold down the [FINDER/MENU Button] to show
the <Menu Screen>.

fig.recoedersetting-e.eps_80

2. Select “Recorder Setup.”

Use the [PLAY Button ] and [STOP Button ] to select
“Recorder Setup,” then press the [REC Button].

Using external microphones

Stereo microphone

LR

Hold down
Hold down
Show
<Menu Screen>
Move the
cursor
up or down Enter
R-09_e.book 33 ページ 2006年4月6日 木曜日 午後4時51分