82

R-09 Configuration Settings

The following setting needs to be made when using an external microphone. Set it to ON
when using a microphone that requires plug-in power; set it to OFF when the microphone
uses batteries or does not require plug-in power.

Damage may result if you connect a dynamic microphone or a battery-powered microphone when the R-
09 is set to use plug-in powered microphones.

fig.inputsetting-e.eps_80

1.

Select “Input Setup” from the <Menu

Screen>.

Use the [PLAY Button ] and [STOP Button ] to select
“Input Setup,” then press the [REC Button].

fig.pluginpower-e.eps_80

2.

Select “Plug-in Power.”

Use the [PLAY Button ] and [STOP Button ] to move
the cursor to the Plug-in Power line.

fig.setpluginpower-e.eps_80

3.

Make the setting for plug-in powered

microphones.

Use the [RWD Button ] and [FWD Button ] to set
whether to use a plug-in powered microphone or not by
changing the setting for Plug-in Power.

When finished with the settings, press the [MENU] button to return
to previous screens.
“Using external microphones” (p. 33)

Plug-inSetting whether to use a plug-in powered

microphone or not (Plug-in Power)

Setting OFF
(not using plug-in powered microphone)
ON (using plug-in powered microphone)
Move the
cursor
up or down Enter
Move the
cursor
up or down
Change
the value
R-09_e.book 82 ページ 2006年4月6日 木曜日 午後4時51分