43
Playing back
fig.recording-1.eps
1Press the R-44 [MENU] button.
The System Menu screen appears on the Display.
fig.player-setup2.eps
2Use the Cursor buttons [ ] [ ] to choose 2 Player
Setup, and press the [ENTER] button.
The Player Setup screen appears.
3Use the [SCRUB/VALUE] dial to choose the Play Mode
value.
* The setting is applied as soon as you select it. You do not need to press
the [ENTER] button.
You can also setup the following items.
* The values in boldface are the default values.
* For more about system settings, refer to “System setup” (p. 60).
Setup before playback

Player Setup

Menu Player Setup
settings Playback method
Play Mode Single Selects the play mode.
Only the selected project will play.
Sequential The projects in the folder containing the currently selected project will
play consecutively.
Repeat OFF, ON Selects whether playback will repeat.
If Play Mode is Single, only that project will be repeated. If it is Se-
quential, the projects in the folder containing the currently selected
project play consecutively, and then the projects in the same folder
will be repeated consecutively from the beginning.
R-44_e_new.book 43 ページ 2008年1月7日 月曜日 午後5時8分