44
Playing back
You can use the R-44 Internal speakers to monitor the sound without having to connect headphones or
other equipment.
fig.recording-1.eps
1Press the R-44 [MENU] button.
The System Menu screen appears on the Display.
fig.speaker-on.eps
2Use the Cursor buttons [] [] to choose 3 Speaker,

and press the [ENTER] button.

The Speaker screen appears.
* The value in boldface is the default value.
* Note that sound will not be output from the internal speakers if headphones are connected. If you want to use the
internal speakers, you must disconnect the headphones.
* You cannot monitor with the internal speakers while recording. You will need to monitor through headphones.
* For more about system settings, refer to “System setup” (p. 60).
Speaker settings
Speaker Switch setting Output destination
ON Internal speakers
Line output jacks
Digital output jack
OFF Line output jacks
Digital output jack
R-44_e_new.book 44 ページ ２００８年１月７日　月曜日　午後５時８分