70
System setup
fig.date-1a.eps
You can set the date and time.
If Project Name is set to Date, the time you specify here is
used to set the date in the project name.
This setting is also used for the date and time shown on the
lower part of the Display in the Main screen.
You can use Name 1–8 to specify eight different name types. The project name will consist of this name
plus a consecutive number of 001, 002, 003, ... appended to it. For example, in the case of the default setting
Scene1, the project name will be Scene1_001.
In order to use a name you have specified here, you will need to set the Recording Setup parameter
Project Name to Name 1–8.
You can format and check SD memory cards. You cannot execute SD card commands during recording or
playback.
This command resets the following settings to their factory default settings. You cannot execute Factory
Reset during recording or playback.
Recording Setup
Player Setup
Speaker
Display Setup
System Setup
Project Name
Effects (Type, Link, Play, Rec, Parameters)
6 Date & Time7 Project Name8 SD Card
Command Explanation
Format
Formats the SD memory card.
All projects and folders in the SD memory card are erased; afterwards, the SD memory
card is empty.
* Be sure to back up your projects before you execute this command.
Check
Checks the SD memory card, and after reorganization, frees up any SD memory card
space not used by R-44 Projects.
* There is no guarantee that this command will restore the SD memory card to a normal
operating state. Since this command directly manipulates the SD memory card sectors,
projects may be damaged. Be sure to back up your projects before executing this command.
9 Factory Reset
Year Month Date (Weekday)
Time
Available characters
(space) !#$%&'()+,-.01234546789;=@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_` abcdefghijklmnopqrstuvwxyz{}
R-44_e_new.book 70 ページ ２００８年１月７日　月曜日　午後５時８分