Edirol V-8 Panel Descriptions

10
Panel Descriptions
fig.top-panel1-e.eps
Menu Operation Buttons
These are used when working with the menu.
☞ “Operating the Menu” (p. 24)
● [MENU] Button
This button overlays the menu onto the television monitor
connected to the PREVIEW OUT connector (p. 13).
If you’ve moved to a lower-level menu, this button will return you
to the preceding menu (the next higher level).
If the menu is displayed, the [MENU] button will light.
● [ ] [ ] Buttons
These buttons move the cursor that is displayed in the menu.
Alternatively, they edit a value in the menu.
● [ENTER] Button
This button confirms the menu item you’ve selected, and takes
you to the next menu (a lower level).
BPM Display
● This shows the current BPM (Beats Per Minute).
☞ “Switching Images at a Specified BPM” (p. 60)
● If you’ve chosen “003: Fam ✽ ” or “005: Nam ✽ ” as the transition
effect selected by a TRANSITION button, this will blink to
indicate the FAM/NAM cross point level.
☞ “Changing the cross point of the FAM/NAM” (p. 37)
[TAP] Button
You can specify the BPM by pressing the [TAP] button at the
desired interval.
☞ “Switching Images at the Tempo Specified by the [TAP] Button” (p. 61)
[BPM/CONTROL] Knob
● Use this to edit the BPM value.
● If you’ve used the TRANSITION buttons ( ) to select “003:
Fam ✽ ” or “005: Nam ✽ ” as the transition effect, this will adjust
the way in which the transition occurs.
☞ “About the FAM and NAM Transition Effects” (p. 37)
[MEMORY] Knob
This knob stores up to seven settings (memory numbers 2–8) for
the operating panel (i.e., the buttons and faders). The factory
preset settings are assigned to memory number 1.
The stored settings will be called up when you turn the
[MEMORY] knob to the desired memory number.
☞ “Storing the Operating Panel Settings ([MEMORY] Knob)” (p. 28)
Bus A INPUT SELECT Buttons
Use these buttons to select the image that will be input to bus A
of the video mixer.
fig.inputsel-indicator-e.eps
The indicator of the selected INPUT SELECT
button will light.
☞ “Switching Between Two Images” (p. 35)
* For channels 5–8, input from the S-video connector will take priority.
* Use the [PC INPUT SELECT] button to choose the input from the PC1/
PC2 connectors.
Operating Panel
Indicator
V-8_e.book 10ページ ２００８年５月１５日 木曜日 午後１時１１分