Edirol V-8 , Recalling a Memory, Copying the Contents of a Memory

29
Basic Operation
(continued)
Input/output
settings
Introduction Connections Basic operation Switching images Effects BPM sync External devices Video fader Appendices
1
Turn the [MEMORY] knob to the memory number 1–8 that you want to recall.
The settings will be recalled.
fig.memory-dialset.eps
* Memory number 1 contains the factory preset settings (p. 28).
Here’s how to copy the settings of the currently selected memory number to a different memory number.
1
Turn the [MEMORY] knob to select the desired copy-source memory number 1–8.
fig.memory-dialset.eps
* Memory number 1 contains the factory preset settings (p. 28).
2
Press the [MENU] button to access the menu, and choose “Memory Edit.”
fig.menu-memory.eps_18
Press the [MENU] button to access the menu.
Use the [ ] [ ] buttons to select “Memory Edit.”
Press the [ENTER] button to confirm your selection.
3
Use the [ ] [ ] buttons to select the desired copy-destination memory number, and press the
[ENTER] button.
fig.menu-memory-c.eps_18
fig.memory-copy-e.eps
To copy the contents of memory, choose an item that shows “Copy” at the left
side. In the screen example shown here, the settings of memory number 2 will
be copied to memory number 6.
You can change the copy-source memory number at this time by turning the
[MEMORY] knob.
By choosing “Mem ✽ -> All” you can copy the settings to all memory numbers
2–8.
4
Make sure that the display indicates “Push [ENTER],” and press [ENTER].
(If you decide to cancel, press the [MENU] button.)
The contents of memory will be copied.
5
Press the [MENU] button several times to close the menu.
Recalling a Memory
Copying the Contents of a Memory
Copy-source memory number Copy-destination memory number
V-8_e.book 29ページ ２００８年５月１５日 木曜日 午後１時１１分