Edirol V-8 , Changing the Assignment of the [TRANSFORMER] Buttons

41
Switching Between Images
(continued)
Input/output
settings
Introduction Connections Basic operation Switching images Effects BPM sync External devices Video fader Appendices
You can change the duration or operation of the transition that occurs when you use the [TRANSFORMER] buttons to switch
between images.
You can also assign a TRANSITION button or EFFECTS button to a [TRANSFORMER] button, and use it to control a
transition or effect.
1
Turn the [MEMORY] knob to select the memory number 2–8 whose settings you want to edit.
* Memory number 1 contains the factory preset settings (p. 28). These settings
cannot be modified.
2
Press the [MENU] button to access the menu, and choose “Transformer-A” or “Transformer-B.”
Press the [MENU] button to access the menu.
Use the [ ] [ ] buttons to select “Transformer-A” or
“Transformer-B.”
Choose the menu item for the button whose setting you want to edit.
Press the [ENTER] button to confirm your selection.
3
Use the [ ] [ ] buttons to specify the operation of the [TRANSFORMER] button.
*1 The numbers 0–9 indicate the time taken by the transition. Higher numbers produce a longer transition time.
*2 The numbers 1–4 indicate the number of an EFFECTS button.
4
Press the [MENU] button several times to close the menu.
Changing the Assignment of the [TRANSFORMER] Buttons
Button Menu item
Bus A [TRANSFORMER] button Transformer-A
Bus B [TRANSFORMER] button Transformer-B
Value Details
01: None The [TRANSFORMER] button will not do anything.
02: Trans
The image of the bus whose button you press will be output as long as you hold down the
[TRANSFORMER] button.
03: A<->9 – 12: A<->0
*1
03: 9<->B – 12: 0<->B
*1
The bus A and bus B images will alternate each time you press the [TRANSFORMER] button.
13: A<-9 – 22: A<-0
*1
13: 9->B – 22: 0->B
*1
The output will switch to the bus A image when you press the [TRANSFORMER] button.
The output will switch to the bus B image when you press the [TRANSFORMER] button.
23: A->9 – 32: A->0
*1
23: 9<-B – 32: 0<-B
*1
The output will switch to the bus B image when you press the [TRANSFORMER] button.
The output will switch to the bus A image when you press the [TRANSFORMER] button.
33: White A white image will be output while you hold down the [TRANSFORMER] button.
34: Black A black image will be output while you hold down the [TRANSFORMER] button.
35: MIX The [1 MIX] button will be selected while you hold down the [TRANSFORMER] button.
36: WIPE The [2 WIPE] button will be selected while you hold down the [TRANSFORMER] button.
37: EFX The [3 EFX] button will be selected while you hold down the [TRANSFORMER] button.
38: EFXA1 – 41: EFXA4
*2
38: EFXB1 – 41: EFXB4
*2
The bus A EFFECTS button will turn on while you hold down the [TRANSFORMER] button.
The bus B EFFECTS button will turn on while you hold down the [TRANSFORMER] button.
If you use the [TRANSFORMER] buttons or BPM Sync (p. 60) to switch images automatically, there will be situations in which
the position of the video fader will not match the actual output. If you set the “Utility” menu item “Video Fader Mode” to “Quick,”
the output will change to match the fader position when you move the video fader slightly (p. 78).
V-8_e.book 41ページ ２００８年５月１５日 木曜日 午後１時１１分