Edirol V1 video mixer 3. Additional information

MIDI implementation

●2-2-1. System Common Preference

Address	Parameter Name	Sys.Ex.Value	Meaning of Value
10H 00H 00H	V-LINK Enabled	00H - 01H	OFF, ON
10H 00H 01H	V-LINK MIDI Rx Channel	00H - 0FH	1 - 16 Ch.
	(Clip)
10H 00H 02H	V-LINK MIDI Rx Channel	---	---
	(Color)
10H 00H 03H	V-LINK Note Message Enabled	00H - 03H	Note Mode: OFF,
			49Keys Mode,
			Assign Mode,
			Note Assign
10H 00H 04H	V-LINK Fast Control Enabled	---	---
10H 00H 05H	V-LINK MMC Control	---	---
	Mode
10H 00H 06H	V-LINK MTC Control Mode	---	---
10H 00H 07H	V-LINK Auto Mix Mode	---	---

●2-2-2. Clip Control Preference

Address	Parameter Name	Sys.Ex.Value	Meaning of Value
#10H 10H 00H	V-LINK Rx Setting	---	---
	(Playback Speed)
#10H 10H 02H	V-LINK Rx Setting	01H-05H,07H-1FH,	Transition Time:
	(Dissolve Time)	40H-5FH, D0H,	Control Change,
		E0H, FFH	Channel Press,
			Pitch Bend, OFF
#10H 10H 04H	V-LINK Rx Setting	---	---
	(Audio Level)
#10H 10H 06H	V-LINK Rx Setting	01H-05H,07H-1FH,	Video Fader:
	(T-Bar Control)	40H-5FH, D0H,	Control Change,
		E0H, FFH	Channel Press,
			Pitch Bend, OFF
#10H 10H 08H	V-LINK Rx Setting	---	---
	(Dual Stream)
#10H 10H 0AH	V-LINK	---	---
	Reserved
#10H 10H 0CH	V-LINK	---	---
	Reserved
#10H 10H 0EH	V-LINK	---	---
	Reserved
#10H 10H 10H	V-LINK Rx Setting	01H-05H,07H-1FH,	MIX, WIPE / P in P:
	(Transition Select)	40H-5FH, D0H,	Control Change,
		E0H, FFH	Channel Press,
			Pitch Bend, OFF
#10H 10H 12H	V-LINK Rx Setting	---
	(Transformer A)
#10H 10H 14H	V-LINK Rx Setting	---
	(Transformer B)
#10H 10H 16H	V-LINK Rx Setting	---
	(BPM Sync)

●2-2-3. Color Control Preference

Address	Parameter Name	Sys.Ex.Value	Meaning of Value
#10H 20H 00H	V-LINK Rx Setting	---	---
	(Color Cb)
#10H 20H 02H	V-LINK Rx Setting	---	---
	(Color Cr)
#10H 20H 04H	V-LINK Rx Setting	---	---
	(Brightness)
#10H 20H 06H	V-LINK Rx Setting	01H-05H,07H-1FH,	Superimpose:
	(VFX A 1)	40H-5FH, D0H, E0H,	Control Change,
		FFH	Channel Press,
			Pitch Bend, OFF
#10H 20H 08H	V-LINK Rx Setting	---	---
	(VFX A 2)
#10H 20H 0AH	V-LINK Rx Setting	---	---
	(VFX A 3)
#10H 20H 0CH	V-LINK Rx Setting	---	---
	(VFX A 4)
#10H 20H 0EH	V-LINK Reserved	---	---
#10H 20H 10H	V-LINK Reserved	---	---
#10H 20H 12H	V-LINK Reserved	---	---
#10H 20H 14H	V-LINK Reserved	---	---
#10H 20H 16H	V-LINK Rx Setting	---	---
	(VFX B 1)
#10H 20H 18H	V-LINK Rx Setting	---	---
	(VFX B 2)
#10H 20H 1AH	V-LINK Rx Setting	---	---
	(VFX B 3)
#10H 20H 1CH	V-LINK Rx Setting	---	---
	(VFX B 4)
#10H 20H 1EH	V-LINK Reserved	---	---
#10H 20H 20H	V-LINK Rx Setting	01H-05H,07H-1FH,	Output:
	(Output Fader)	40H-5FH, D0H, E0H,	Control Change,
		FFH	Channel Press,
			Pitch Bend, OFF

3. Additional information

MIDI transmission/reception settings when the V-1 is shipped from the factory.

●Note Mode

This specifies whether note-on messages will switch the inputs.

The factory setting is OFF.

This can be set via MIDI to 0--3, corresponding to OFF, 49Keys Mode, Assign Mode, and Note Assign.

●MIDI Rx Channel

Specifies the MIDI receive channel of the V-1.

The factory setting is 1.

This can be set via MIDI to 0--16, corresponding to 1--16 and OFF.

●MIDI Tx Channel

Specifies the MIDI transmit channel of the V-1.

The factory setting is 1.

●Transition Time

Specifies the transition time.

When shipped, this is assigned to CC#07 (Volume).

The range is 0--127, corresponding to 0.0 seconds through 4.0 seconds.

●Superimpose

Turns the Superimpose effect on/off and specifies its value.

When shipped, this is assigned to CC#04 (Foot type).

The range is 0, 1--127, corresponding to OFF, ON: 0--Max.

●Transition Pattern

Selects the type of transition.

When shipped, this is assigned to CC#01 (Modulation).

The range is 0--1, corresponding to MIX through WIPE/P in P.

●Output

Controls the output.

When shipped, this is assigned to CC#02 (Breath type).

The MIDI value range is 0--64--127, corresponding to OFF (black)--ON--OFF (white).

●Video Fader

Controls the video fader.

When shipped, this is assigned to CC#11 (Expression).

The MIDI value range is 0--127, corresponding to A--B.

●Default V-LINK settings

The default V-LINK state (i.e., when only the V-LINK ON message has been received) is as follows.

Parameter	Assignment	Value
Note Mode	-	OFF
Rx Channel	-	1
Tx Channel	-	1
Input Select	-	Ach:1
		Bch:2
Pattern Select	-	1
Transition Time	CC#5	0.0sec
Superimpose	OFF	OFF
Transition Pattern	OFF	1
Output	OFF	ON
Video Fader	CC#11	A 100%

*When V-LINK is OFF, any V-LINK messages received will be ignored.

*Settings that were modified while V-LINK was on (i.e., settings that can be modified via MIDI) are not saved.

*When changing from V-LINK ON to OFF, the V-1 will revert to the settings it had before V-LINK was turned on.

26