GENERAL INFORMATION
1-3 February 2001
Part No. 001-9800-001
1.4 TRANSCEIVER IDENTIFICATION
The transceiver identification number is printed
on a label that is attached to the chassis. The informa-
tion is contained in this number is shown in Table 1-2 .
This number is stored electronically and can be read
using the programming software.
1.5 ACCESSORIES
The accessories available for this transcei ver are
listed in Table 1-3. The following is a brief description
of most of these accessories.
Mounting Accessories - The -030 mounting kit
contains mounting knobs and four self-drilling screws.
The -610 kit contains mounting knobs, a remote
mounting bracket, and four self drilling screws. The
10- and 22-ft. cable kits include a fused power cable
and microphone hanger with a ground wire
Key Cap Kit - A key cap kit which includes five caps
labeled for common functions is standard with each
transceiver. Optional kits are also available. Refe r to
Section 2.8 for more key cap information.
Table 1-2 Identification Number Breakdown
Table 1-3 98xx Accessories
Accessory Part No.
Mounting Accessories
Front mounting kit 023-9800-030
Remote mounting kit 023-9800-040
10 ft. DC power cable and hardware kit 023-9800-410
22-ft. DC power cable and hardware 023-9800-422
Standard mounting bracket 017-2229-005
Low-profile mounting bracket 017-2229-010
98xx x A 10 0 A 12345
Model Revision
Letter Manufacture
Date Warr anty
Number
Week No. of Year
Last Digit of Year
A = Waseca
Type
PlantFrom P.N.
1 = Low pwr LTR
2 = High pwr LTR
3 = High pwr Data MN
4 = Low pwr LTR-Net
5 = High pwr LTR-Net
6 = Low pwr Multi-Net
7 = High pwr Multi-Net
8 = Low pwr Data LTR
9 = High pwr Data LTR
0 = Low pwr Data MNet
A = SMARTNET/SmartZone
NOTE: Low power = 25W
UHF, 15W 800/900 MHz;
High power = 40W UHF,
30W 800/900 MHz)
Standard Key Cap Kits (5 key caps)
Multi-Net 587-9840-001
LTR-Net 587-9840-002
SMARTNET/SmartZone 587-9840-003
Optional Key Cap Kits (20+ key caps)
Multi-Net/LTR-Net 587-9840-004
SMARTNET/SmartZone 587-9840-105
Microphones
Standard amplified dynamic 250-0740-300
Standard DTMF w/lighted keypad 250-0751-021
WR 805 DTMF (weather resistant) 589-0016-029
Desk-type 250-0742-010
Remote Speaker, 5”, 15W, 4.7 ohm 250-0151-010
Remote conversion kit 250-9800-001
Remote control extension cable, 11 ft. 597-9800-009
Remote control pigtail cable (for xcvr) 597-9800-011
Accessory cable components
Accessory pigtail cable 597-9800-003
Accessory wire kit 023-9750-011
Data/accessory cable kit (both cables
included, w/o data connector) 597-9800-001
Data pigtail cable (data cable only w/o data
connector) 597-9800-005
Compander kit 250-9800-310
Encryption kit, Transcrypt® SC20-4xx SC20-4xx
Desktop Power Supply
15 A, 117 VAC 239-0226-113
15 A, 230 VAC 239-0226-213
Wedge mounting pedestal kit (includes
10 ft. power cable) 023-8610-914
Programming Accessories
Remote Programming Interface (RPI) 023-9800-000
Cable, RPI to transceiver 597-2002-200
Cable, RPI to computer, 6 ft.
(DB9F to DB9M) 597-5900-002
Programming software (see manual
listed in Section 1.1.1)
Table 1-3 98xx Accessories (Continued)
Accessory Part No.