![](/images/new-backgrounds/1313996/31399617x1.webp)
E G O 4 0 0 0 P L U S O P E R AT I O N M A N U A L
OPERATING INSTRUCTIONS continued
OPERATING INSTRUCTIONS continued
6.Press PLAY/PAUSE button to play the programmed track while “PROG” is shown on the LCD display.
7.Repeat steps 1 to 7 to program all tracks up to 99 tracks.
TO PLAY THE PROGRAMMED SEQUENCE:
Press PLAY/PAUSE button while “PROG” is shown on the LCD display.
While playing, you can press SCAN UP/DOWN button to skip forward or backward,
and you can also set repeat playback for one or all the programmed tracks by pressing MODE button.
After the last programmed track is played, the player will stop automatically.
AM/FM TUNER OPERATION
LISTENING TO THE RADIO
1.Press TUNER/BAND button to turn on the tuner. Whenever the tuner is turned on, it always begins at the last listened station.
2.Press TUNER/BAND button repeatedly to select either AM or FM band.
3.Use one of following methods to tune for the desired station. The display shows the tuned frequency.
• Memory Tuning: Press PRESET+/ PRESET- |
buttons. When one of the preset stations is |
selected, the LCD shows channel number |
“CH0” and frequency |
There are 20 stations presets for FM and 10 |
station presets for AM. |
•Automatic Tuning: Press SCAN UP/DOWN or MODE button with a long press to automatically tune upward or downward to the next station with strong reception. Press EQ/PROG twice or STOP button once to stop automatic tuning.
NOTE:
•For better FM reception, extend and adjust the telescopic FM antenna to optimize reception.
•While listening to stereo FM broadcasting, if the signal is strong enough, “STEREO” indicator will appear on the LCD display.
If reception is poor or noisy, you may press ST/MONO button to turn it to MONO broad- casting. When MONO is selected, reception will be better, and “MONO” appears on LCD display.
•Press STOP button to turn off the radio.
2.Press SCAN UP/DOWN button to tune for the desired station.
3.Select the desired memory with
PRESET+/PRESET– buttons. Once the desired memory is selected, press EQ/PROG button to save the memory.
4.Repeat steps 1 to 3 to store other stations into memory.
RETRIEVING STATION MEMORIES
1.Press TUNER/BAND button to select either AM or FM band.
2.Press PRESET+/PRESET– buttons to find the preset station stored in memory that you wish to hear.
To clear a programmed sequence:
1.Press STOP button while a programmed
sequence plays, and the PROG indicator will disappear from the display, or
2.Open the disc cover by pressing OPEN button, or
3.Unplug the AC/DC adaptor to turn off the unit.
• Manual Tuning: Press SCAN UP/DOWN |
buttons with quick, short presses to manually |
tune upward or downward to the desired |
radio station. |
3. Stop at the preset station desired and the station will begin play automatically.
STORING STATION MEMORIES
You can store up to 20 FM stations and 10 AM stations in memory. Follow steps below to set station memory presets:
1.Press TUNER/BAND button repeatedly to select either AM or FM band.
16 | 17 |