7. Getting your RadioLink Base Serviced
If your RadioLink Relay fails to work after your have carefully read all the instructions, checked that the unit has been installed correctly, and is receiving AC power (green light on) contact Customer Assistance at the nearest address given at the end of this leaflet. If it needs to be returned for repair or replacement, open cover and turn off rechargeable cells with slide switch (see fig 1b). Put the RadioLink Relay in a padded box and send it to “Customer Assistance and Information” at the nearest address given on the unit or in this leaflet. State the nature of the fault, where the RadioLink Base was pur- chased and date of purchase.
8. Five Year Guarantee
Ei Electronics, guarantees this Ei 428 RadioLink Relay for five years from date of purchase against any defects that are due to faulty materials or workmanship. This guarantee only applies to normal conditions of use and service, and does not include damage resulting from accident, neglect,
Do not interfere with the RadioLink Relay or attempt to tam- per with it. This will invalidate the guarantee, but more impor- tantly may expose the user to shock or fire hazards. This guarantee is in addition to your statutory rights as a con- sumer.
9. Technical Specification
Mains: 230 VAC, 40mA, 50HZ, 0.8W
Mains Indicator: Green LED lights continuously (apart from when it switches momentarily to red as outlined below) Battery
Approvals: Complies with EMC, Electrical Safety and Radio Regulations – including requirements of the RTTE Directive Compatibility 1999/5/EC (RF Performance to
Radio Frequency: 868.499 MHz (Regulated 1% duty cycle band)
RF Power: +5dBm
Range: 150 meters (minimum) in free space
RF RECEPTION
Alarm Signal Reception: Switches latching relay for 60 sec- onds (with switch in continuous mode) unless it receives an
6