?The CO Alarm will automatically reset once the CO has cleared. Pressing the test/hush button resets the CO Alarm immediately (below 300ppm CO). If CO is still present the red light and horn will turn on again after about 4 minutes.
?The CO Alarm is no substitute for keep- ing chimneys and flues clear and in good condition, and all of your appli- ances serviced regularly according to the manufacturer’s instructions.
Do not fit alarm until all building work is completed to avoid contamination.
2.CARBON MONOXIDE - THE SILENT KILLER!
2.1What is Carbon Monoxide ?
Congratulations on becoming the owner of an Ei Carbon Monoxide Alarm. This will help protect you and your household from the dangerous effects of Carbon Monoxide - the silent killer. (CO is the chemical symbol, indi- cating the module has one carbon atom and one oxygen atom).
Figure 1 - Alarm Installation
LOCATION FOR |
| |
TAMPERPROOF SCREW | GAS ENTRY HOLES | |
(see page 16) | ||
|
SIDE VIEW
MOUNTING PLATE
TAMPERPROOF CATCH PUSH SMALL
SCREWDRIVER STRAIGHT IN TO RELEASE. PUSH COVER
BACK
WARNING: DISCONNECT MAINS BEFORE REMOVING ALARM FROM CEILING OR WALL
3
