IMPORTANT SAFEGUARDS
When using your EIKI 392 overhead projector, basic safety precautions should always be followed, including the following:
1.Read the following instructions carefully before operating the EIKI overhead projector.
2.Make sure that the operating voltage of the overhead projector corresponds to your local voltage.
3.Care must be taken to ensure the smooth airflow of the cooling system. Immediately switch off the machine if the fan is not functioning properly.
4.To avoid the potential electric shock and to ensure the stability of the optical parts, do not disassemble this projector unless you are a qualified electrician and technician.
5.Tilt up the projection mirror before switching on the overhead projector.
6.Disconnect the power plug from the power source when examining or repairing the interior of the projector.
7.Only qualified service personnel should perform the maintenance and repair work.
8.To avoid the potential electrical shock, do not expose this overhead projector to rain, moisture, or other liquids.
9.Let overhead projector cool completely before putting away. Store the power cord properly in the storage area provided.
10.Do not let cord hang over edge of table or counter or touch hot surfaces.
11.For Pluggable equipment, the
A Safety Interlock is located on the edge of the cabinet. When the platen of the overhead projector is opened, the power supply will cut off. Please make sure the platen is opened during repair to avoid electric stock
1
