Eiki LC-HDT10 instruction manual Operation of Remote Control, 1WIRED Remote Jack

BEFORE OPERATION

OPERATION OF REMOTE CONTROL

qSELECT button

Executes the item selected. (P20)

wSIGNAL EMISSION indicator

This indicator lights red while a signal is being sent from the remote control to the projector.

eSCREEN button

Select image screen. (P28)

qr ZOOM button

Adjust zoom. (P23)

tFREEZE button

Freezes the projected picture. (P23)

yMUTE button

Mutes sound. (P24)

uFOCUS button

Adjust focus. (P23)

iPOINT (UP/DOWN/LEFT/RIGHT) button

Selects an item or adjusts value in the On-Screen Menu. (P20) Point Left/Right button are also used as VOLUME +/- button. (P24)

oSELECT button

Executes the item selected. (P20)

w e r

t y

u

▲

ZOOM

▲

▲

FOCUS

▲

	!1	!0IMAGE (1-10) buttons
		Selects image levels (IMAGE 1 - IMAGE 10). (P32)
ON-OFF		!1WIRED REMOTE JACK
	!2
		When using as Wired Remote Control, connect Remote Control Cable to
	!3	this jack.
	!4	Battery installation is required when using as Wired Remote Control.
		!2POWER ON-OFF button
	!5
	!6	Turns the projector on or off. (P22)

i

o

SELECT

!3AUTO PC button

Operates the Auto PC adjustment function. (P29)

!4NO SHOW button

Turns the picture into black image. (P23)

!5MENU button

Opens or closes the On-Screen Menu. (P20)

!0

RESET

!7	!6
	LENS SHIFT button
	Select LENS SHIFT function. (P23)
	!7
	INPUT 1-4 buttons
	Select input source (INPUT 1-INPUT 4). (P25)
!8	!8IMAGE button
!9
	Selects image levels. (P32)

!9RESET switch

Slide this switch to the "RESET" to initialize the remote control code. (P19, 37)

18