Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its
✔Note:
The projector may display one of the following messages.
Auto | When the projector cannot recognize connected |
| signal conforming to PC Systems provided in this |
| |
| projector, Auto PC Adjustment function works to |
| display proper images and the message “Auto” is |
| displayed on the PC System menu box. When the |
| image is not projected properly, manual adjustment is |
| required. (p30, 31) |
-----There is no signal input from computer. Check the connection of your computer and the projector. (See " Troubleshooting" p54)
Mode 1 | User preset system manually adjusted in PC Adjust |
| menu. Adjustment data can be stored in Mode 1 - 5. |
| |
| (p30, 31) |
| PC Systems provided in the projector. The projector |
SVGA 1 | |
| chooses a proper system and displays it. |
|
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
1 | Press the MENU button and the |
| appear. Press the Point 7 8 buttons to move the red frame |
| pointer to the PC System Menu icon. |
2 | Press the Point d button to move the red arrow pointer to |
| the system that you want to set, and then press the SELECT |
button.
PC System Menu
The Auto PC Adjustment function operates to adjust the projector.
PC System Menu
The PC System Menu icon displays the system being selected.
Systems on this dialog box can be selected.
Custom Mode (1~5) set in the
PC Adjust Menu. (p30, 31)
28
