Eiki LC-SB21 Manual PC Adjustment, Computer Input, Fine sync, Total dots, Horizontal, Vertical

Computer Input

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a specific computer.

1	Press the MENU button and the On-Screen Menu will
	appear. Press the Point 7 8 button to move the red frame
	pointer to the PC Adjust Menu icon.
2	Press the Point d button to move the red frame pointer to
	the item that you want to adjust and then press the SELECT

button. An adjustment dialog box will appear. Press the Point 78 button to adjust value.

Fine sync

Eliminates flicker from the image displayed. Press the Point 7 8 button to adjust value. (From 0 to 31)

Total dots

Adjusts the number of total dots in one horizontal period. Press the Point 78 button and adjust number to match your PC image.

Horizontal

Adjusts horizontal picture position. Press the Point 7 8 button to adjust the position.

Vertical

Adjusts vertical picture position. Press the Point 7 8 button to adjust the position.

Current mode

Press the SELECT button to show H-Freq. and V-Freq. of the connected computer.

Clamp

Adjusts clamp level. When the image has dark bars, try this adjustment.

PC Adjust Menu icon

PC Adjust Menu

Move the red frame pointer to an item and press the SELECT button.

	Shows status
Selected Mode	(Stored / Free) of the
	selected Mode.

Press the Point 78 button to adjust the value.

Press the SELECT button at this icon to adjust the other items.

Current mode

Press the SELECT button at the Current mode icon to show the information of the connected computer.

30