Video Input
Input Source Selection (Component, RGB Scart 21-pin)
Direct Operation
Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Top Control
| POWER | WARNING LA | |
ON | MENU | INPUT | K |
|
|
| |
- |
|
|
|
OFF |
|
|
|
| SELECT |
|
|
INPUT button
INPUT button
Computer 1
Computer 2
✳
VO | Video |
- |
|
Menu Operation
1 | Press the MENU button to display the | |
| Menu. Press the Point 7 8 buttons to move the red | |
| framed pointer to the Input Menu icon. | |
2 | Press the Point ed buttons to move the red arrow | |
| pointer to Computer 1 and then press the SELECT | |
| button. |
|
3 | After the Source Select Menu appeared for Computer | |
| 1, move the pointer to Component or RGB(Scart) and | |
| then press the SELECT button. | |
| When the input source is coming from | |
Component | ||
|
| video equipment connected to the |
|
| |
|
| COMPUTER IN 1 / COMPONENT IN |
|
| terminal with a |
|
| select Component. |
Remote Control
COMPUTER button
COMPUTER button
Computer 1
Computer 2 ✳
✳See Note at the bottom of this page.
Input Menu | Input Menu icon |
|
Move the pointer (red arrow) to Computer 1 and press the SELECT button.
Computer
1
Source Select Menu
Move the pointer to Component or RGB(Scart) and press the SELECT button.
RGB (Scart) When the input source is coming from video equipment connected to the
COMPUTER IN 1 / COMPONENT IN terminal with a
✔Note:
When Monitor out is selected in the Terminal function (p44) , Computer 2 is not displayed.
Video Input
35
