PREPARATION
NAME OF EACH PART OF THE PROJECTOR
FRONT OF THE PROJECTOR
INFRARED
REMOTE RECEIVER
PROJECTION LENS
REMOVABLE
LENS COVER
LAMP COVER
SPEAKERS
REAR OF THE PROJECTOR
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot. Observe the following when handling your projector or choosing a location to install it.
●Keep
●If you set the projector on top of a metallic surface, the surface will become hot because of the hot air exhaust. Be careful when handling.
●Do not touch the cabinet near to the exhaust vent area, and especially screws and metallic parts. These parts will become hot while the projector is used.
This projector detects the internal temperature and automatically controls the operating power of the Cooling Fans.
| CARRYING HANDLE |
| MAIN ON / OFF |
INFRARED | SWITCH |
REMOTE RECEIVER | POWER CORD | ||
|
|
| |
|
|
| CONNECTOR |
| AIR INTAKE |
| |
|
|
| |
| VENT |
|
|
BOTTOM OF THE PROJECTOR
ADJUSTABLE FEET
AIR INTAKE VENT
7
