PREPARATION

POSITIONING THE PROJECTOR

This projector is basically designed to project on a flat projection surface.

This projector can be focused from 4.9' (1.5 m) ~ 80.7' (24.6 m).

Refer to the figure below as an example when positioning the projector to the screen.

THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. NEVER HANG

THE PROJECTOR, OR FALL DOWN ON ITS SIDE. IT MAY RESULT IN FIRE

HAZARD.

ROOM LIGHT

 

 

 

 

 

 

 

 

 

 

Maximum Zoom

600"

 

 

 

 

 

 

 

 

 

 

 

 

 

Minimum Zoom

The projector should be placed in a room with

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

400"

 

 

limited light. Picture quality will be directly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

300"

 

 

 

 

affected by lightning conditions.

 

 

150"

200"

 

 

462"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

308"

 

 

 

 

40"

 

115"

 

154"

 

 

231"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

77"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DISTANCE

Screen

Max. Zoom

40"

100"

150"

200"

300"

400"

600"

 

Size

Min. Zoom

 

77"

115"

154"

231"

308"

462"

 

 

 

 

 

 

 

 

 

 

 

Distance

4.9' (1.5 m)

13.1' (4.0 m)

20' (6.1 m)

26.9' (8.2 m)

40' (12.2 m)

53.8' (16.4 m)

80.7' (24.6 m)

 

 

 

 

 

 

 

 

 

 

 

VENTILATION

This projector is equipped with a cooling fan to protect it from overheating. Pay attention to the following to ensure the ventilation and avoid a possible risk of fire and malfunction.

Do not cover the vents with papers or other materials.

Keep the rear grill at least 3.3' (1m) away from any object.

Make sure that there are no objects under the projector.

An object under the projector may prevent the projector from taking the cooling air through the bottom vent.

EXHAUST VENT

AIR INTAKE VENT(REAR SIDE) (BOTTOM SIDE)

9

Page 9
Image 9
Eiki LC-SX3L instruction manual Positioning the Projector, Room Light, Ventilation