Eiki LC-SX4L instruction manual Picture Screen Adjustment, Screen Menu

COMPUTER INPUT

PICTURE SCREEN ADJUSTMENT

This projector has a picture screen resize function, which enables you to display desirable image size.

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT button(s) to move a red frame pointer to
	SCREEN Menu icon.
2	Press POINT DOWN button and move a red frame pointer to
	function that you want to select and then press SELECT button.

Normal

Provides image to fit original resolution size (1280 x 1024).

True

Provides image in its original resolution. When original image resolution is larger than original resolution (1280 x 1024), this projector enters “Digital zoom +” mode automatically and the image is compressed.

Wide

Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.

Digital zoom +

When Digital zoom + is selected, ON-SCREEN MENU disappears and message “D. Zoom +” is displayed. Press SELECT button to expand image size. And press POINT UP/DOWN/LEFT/RIGHT button(s) to pan image. Panning function can work only when input image resolution is larger than pane resolution (1280 x 1024).

A projected image can be also expanded by pressing D.ZOOM ▲ button on Remote Control Unit.

Digital Zoom –

When Digital zoom – is selected, ON-SCREEN MENU disappears and message “D. Zoom –” is displayed. Press SELECT button to compress image size.

A projected image can be also compressed by pressing D.ZOOM ▼ button on Remote Control Unit.

To cancel Digital Zoom +/– mode, press any button except D.ZOOM

▲/▼, SELECT, POINT and AUTO PC ADJ. buttons.

SCREEN MENU

SCREEN Menu icon

Move a red frame to function and press

SELECT button.

NOTE

●True and Digital zoom +/– cannot be operated when “RGB”, “1035i (HDTV)”, “1080i50 (HDTV)” or “1080i60 (HDTV)” is selected on PC SYSTEM Menu (P26).

●Wide cannot be selected when “720p (HDTV)”, “1035i (HDTV)”, “1080i50 (HDTV)” or “1080i60 (HDTV)” is selected on PC SYSTEM Menu (P26).

●This projector cannot display any resolution higher than 1600 X 1200. If your computer’s screen resolution is higher than 1600 X 1200, reset resolution to lower before connecting projector.

●Input image data in other than SXGA (1280 x 1024) is modified to fit original resolution size (1280 x 1024) in initial mode.

●Panning function may not operate properly if computer system prepared on PC ADJUST Menu is used.

33