PREPARATION
NAME OF EACH PART OF PROJECTOR
FRONT
SPEAKERS
INFRARED
REMOTE RECEIVER
PROJECTION LENS
LENS CAP
CAUTION
Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap and result in fire hazard.
CARRYING HANDLE
AIR INTAKE
VENT
ADJUSTABLE FEET
BACKINFRARED
EXHAUST VENT | REMOTE RECEIVER |
| |
HOT AIR EXHAUSTED ! |
|
AIR INTAKE
VENT
Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken.
●Do not put a flammable object near this vent.
●Keep rear grills at least 3’ (1m) away from any object, especially
●Do not touch this area, especially screws and metallic parts. This area will become hot while a projector is used.
This projector detects internal temperature and automatically controls operating power of Cooling Fans.
LAMP
COVER
MAIN ON / OFF
SWITCH
EXHAUST VENT
POWER CORD
CONNECTOR
BOTTOM
AIR INTAKE VENTS
This projector is equipped with cooling fans for protection from overheating. Pay attention to following to ensure proper ventilation and avoid a possible risk of fire and malfunction.
● Do not cover vent slots.
●Keep bottom clear of any objects.
Obstructions may block cooling air.
AIR INTAKE VENT
7
