![](/images/new-backgrounds/1112452/11245299x1.webp)
This projector has other functions setting: Blue back, Display, Reverse T/B, Reverse R/L, Split wipe, Power management, USB, Remote control and Lamp age.
BLUE BACK (On or OFF)
When this function is in the “On” position, the projector will project a blue image without video noise on the screen when the video source is unplugged or turned off.
DISPLAY (On or Off)
When this function is in the “On” position,
• | Wait Display | • | • Mode Display |
• | Mute Display | • • Zoom/Focus/Lens shift Display | |
• | Normal Display | • | • No show Display |
REVERSE T/B (On or Off)
When this function is in the “On” position, the top/bottom picture reverse.
REVERSE L/R (On or Off) .
When this function is in the On” position, the left/right picture reverse capability lets you project onto a rear projection screen.
SPLIT WIPE (On or Off)
• | Volume | • | Display |
• | D.Zoom | • | Display |
Turn SPLIT WIPE function On in the SETTING menu. The picture will change into next one by sliding black image side ways when the input source is changed.
Change the input source by MODE button. The picture s replaced by black image from side ways to the center, and the next one appears from the center to side ways like drawing the black curtains.
POWER MANAGEMENT (On or Off)
Power management will be turn the projector Lamp off when the input signal is interrupted (Picture is not displayed) over 5 minutes. This aims at saving power and Lamp life. The Lamp is automatically turned on when the signal is input.
To activate this function, turn the “Power management” in the SETTING menu “On”.
USB (Mouse or Control)
This Projector is designed for connecting with USB Port of the computer or peripheral equipment that is to be standard.
When this function is in the | (Mouse) position, you control the pointer of the computer used the projector’s |
wireless remote control | unit. |
When this function is in the | “(Control) position, you control the projector by computer. |
NOTE: Before you control the projector by computer, install USB driver (optionally saled parts) and set up the computer following instruction in the USB driver package. Contact your authorized dealer.