Eiki LC-X70 instruction manual Connecting Projector, Terminals Of Projector

Models: LC-X70

1 56
Download 56 pages 22.4 Kb
Page 12
Image 12
CONNECTING PROJECTOR

CONNECTING PROJECTOR

TERMINALS OF PROJECTOR

This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 12 to 14 and connect properly.

COMPUTER AUDIO

INPUT 1/AUDIO MONITOR

OUTPUT JACK

This terminal is switchable and can be used as computer audio input 1 or audio monitor output (variable).

Set the terminal up as either Computer audio input 1 or Audio Monitor output properly before using this terminal.

COMPUTER INPUT/MONITOR OUTPUT TERMINAL (ANALOG)

This terminal is switchable and can be used as computer input or monitor output. Set the terminal up as either Computer input or Monitor output properly before using this terminal.

Refer to P13, P23.)

Note; This terminal outputs from 5 BNC type computer input on

COMPUTER INPUT

TERMINAL (DIGITAL)

Connect computer output (Digital DVI-D type) to this terminal.

HD (HDCP Compatible) signal can also be connected.

Refer to P13.)

COMPUTER AUDIO

INPUT 2 JACK

Connect an audio output (stereo) from computer to this jack.

(Refer to P13.)

Refer to P13, P23.)

INPUT 2 jacks only.

R/C JACK

USB CONNECTOR (Series B)

When controlling computer with Remote Control Unit of this projector, connect USB terminal of your personal computer to this terminal. (Refer to P13.)

RESET BUTTON

This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart unit. Do not use RESET function excessively.

INPUT 1

ANALOG IN/OUT

DIGITAL(DVI-D)

R/C JACK

AUDIO 1

USB

RESET

CONTROL PORT

IN/OUT

 

 

AUDIO 2

 

G

B

 

R

H/V

V

VIDEO/Y

Cb/Pb

 

Cr/Pr

 

 

 

 

 

INPUT 2

 

 

VIDEO/Y Cb/Pb Cr/Pr

R–AUDIO–L

S–VIDEO

 

 

 

 

 

(MONO)

 

 

 

 

INPUT 3

 

 

When using Wired/Wireless Remote Control Unit as Wired Remote Control, Connect Wired Remote Control Unit to this jack with Remote Control Cable (supplied).

CONTROL PORT CONNECTOR

When controlling computer with Remote Control Unit of this projector, connect mouse port of your personal computer to this connector. (Refer to P13.)

5 BNC INPUT JACKS

Connect component video output (Y, Cb, Cr or Y, Pb, Pr) from video equipment to VIDEO/Y, Cb/Pb and Cr/Pr jacks or connect computer output {5 BNC Type (Green, Blue, Red, Horiz. Sync and Vert. Sync.)} from computer to G, B, R, H/V and V jacks. (Refer to P13 and 14.)

VIDEO INPUT JACKS

 

AUDIO INPUT JACKS

 

S-VIDEO INPUT JACK

Connect composite video

Connect an audio output

 

Connect S-VIDEO

output from video equipment

from video equipment to

 

output from video

to VIDEO/Y jack or connect

these jacks.

 

equipment to this

component video outputs to

(Refer to P14.)

 

jack. (Refer to P14.)

VIDEO/Y, Cb/Pb and Cr/Pr

 

 

 

jacks. (Refer to P14.)

 

 

 

EXTERNAL SPEAKER TERMINALS

Connect External Speaker to these terminals.

(Refer to P13 and P14.)

12

Page 12
Image 12
Eiki LC-X70 instruction manual Connecting Projector, Terminals Of Projector