Eiki LC-X80 Computer Input Source Selection, Menu Operation, Input Menu, Source Select Menu

Input Selection

Computer Input Source Selection

Menu Operation

WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )

1	Press the MENU button to display the On-Screen Menu. Use
	the Point 7 8 buttons to move the red frame pointer to the
	INPUT Menu icon.
2	Use the Point ed buttons to move the red arrow pointer
	to the desired input and then press the SELECT button. The
	Source Select Menu appears.
3	Use the Point ed buttons to select the desired source and
	then press the SELECT button.

RGB (PC analog)

When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog).

RGB (PC digital)

When your computer is connected to INPUT 1 (DIGITAL) terminal, select RGB (PC digital).

INPUT MENU

Input Menu icon

Move the pointer (red arrow) to Input 1 and press the SELECT button.

Input 1

Source Select Menu

Move the pointer (red arrow) to the desired source and press the SELECT button.

✔Note:

•INPUT SOURCE changes if the INPUT 1 button on the remote control is pressed.

•HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content which is delivered by DVI (Digital Visual Interface) from being copied.The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )

When connecting the computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync, and Vert. Sync.)] from the computer to G, B, R, H/HV, and V jacks:

RGB

When your computer is connected to the INPUT 2 (5 BNC INPUT JACKS) terminal, select RGB.

INPUT MENU

INPUT Menu icon

Move the pointer (red arrow) to Input 2 and press the SELECT button.

Input 2

Source Select Menu

Move the pointer (red arrow) to RGB and press the SELECT button.

32