COMPUTER INPUT (RGB Scart
SELECTING INPUT SOURCE
DIRECT OPERATION
Choose either Computer 1 or Computer 2 by pressing the INPUT button on the Top Control or press the COMPUTER button on the Remote Control.
If the projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).
NOTE
INPUT button
Computer 1
Computer 2 | ✽ |
|
Video
COMPUTER button 
Computer 1
| Computer 2 | ✽ |
|
|
●Computer 2 can be selected when the COMPUTER IN 2 / MONITOR OUT terminal is set as Computer 2 at the menu item "Terminal" in the SETTING Menu. (Refer to page 36.)
✽Computer 2 is not displayed when the COMPUTER IN 2/MONITOR OUT terminal is used as Monitor out.
MENU OPERATION
1 | Press the MENU button and the | |
| appear. Press the POINT LEFT/RIGHT button to move the red | |
| frame pointer to the INPUT Menu icon. | |
2 | Press the POINT DOWN button to move the red arrow pointer to | |
| either Computer 1 or Computer 2 (Only the Computer 1 is | |
| displayed when the Monitor out is selected in the SETTING | |
| Menu.), and then press the SELECT button. The Source Select | |
| Menu will appear. | |
3 | Move the | pointer to the correct input source and then press the |
| SELECT button. | |
| When the input source is coming from a computer | |
RGB | ||
|
| through the COMPUTER IN 2 / MONITOR OUT |
|
| |
|
| terminal, select RGB. |
INPUT MENU
Computer
INPUT Menu icon
Move the pointer (red arrow) to Computer 2 and press the SELECT button.
Source Select Menu
Move the pointer to RGB or RGB (Scart) and press the SELECT but- ton.
RGB (Scart)
RGB (Digital)
RGB (Analog)
When the input source is coming from a DVD player through the COMPUTER IN 2 / MONITOR OUT terminal, select RGB (Scart).
When digital signal is connected to DVI terminal, select Digital.
When analog signal is connected to DVI terminal, select Analog.
INPUT MENU
INPUT Menu icon
Move the pointer (red arrow) to Computer 1 and press the SELECT button.
Computer
Source Select Menu
Move the pointer to RGB (Digital) or RGB (Analog) and press the SELECT button.
✽Computer 2 is not displayed when the COMPUTER IN 2/MONITOR OUT terminal is used as Monitor out.
22
