APPENDIX

OPERATING WIRELESS MOUSE

The Remote Control is not only able to operate this projector but also usable as a wireless mouse for most Personal Computers. The POINT button, drag ON/OFF button and two CLICK buttons are used for wireless mouse operation.

This Wireless Mouse function is available only when PC mouse pointer is displayed on a projected screen.

INSTALLATION

To use the Remote Control as Wireless Mouse for a Personal Computer, installation of the mouse driver (not supplied) is required. Make sure that the mouse driver is properly installed in your computer. And make sure that the mouse port (or USB port) of a Personal Computer is activated.

1

Connect the mouse port (or USB port) of your computer to

 

Control Port (or USB connector) of this projector with Control

 

Cable (or USB cable). (Refer to page 11, 12 for connection.)

2

Turn the projector on first, and then turn on your computer.

 

When the computer is switched on first, Wireless Mouse may not

work properly.

Note : When your computer has no mouse port, connect Serial Port of your computer to Control Port of the projector with Control Cable for Serial Port (not supplied).

OPERATING WIRELESS MOUSE

When controlling a PC mouse pointer, operate Wireless Mouse with POINT button, Drag ON/OFF button, LEFT CLICK button and RIGHT CLICK button on Wireless Remote Control.

POINT button

Used to move PC mouse pointer. The pointer is moved

 

DRAG ON

corresponding with the direction you are pressing.

INDICATOR

 

LEFT CLICK button

This button has the same function as the left button in a PC mouse. Press this button and the POINT button to drag a selected screen object.

RIGHT CLICK button

This button has the same function as the right button in a PC mouse.

DRAG ON/OFF button

Use this button and the POINT button to drag a selected screen object. Press and release the Drag ON/OFF button, DRAG ON INDICATOR lights green and the remote control is in Drag mode. Use the POINT button in the direction that you want to drag the screen object. Press and release the Drag ON/OFF button again or press any other button, to drop the object at the new screen location.

DRAG ON/OFF button

POINT button (Move the pointer)

LEFT CLICK button

RIGHT CLICK button

(left button of the mouse)

(right button of the mouse)

40

Page 40
Image 40
Eiki LC-XB10 owner manual Operating Wireless Mouse, Installation