Eiki LC-XB10 Basic Operation, Turning on / OFF Projector, Turning on Projector, Lamp mode

BASIC OPERATION

TURNING ON / OFF PROJECTOR

TURNING ON PROJECTOR

1	Complete peripheral connections (with Computer, VCR, etc.)
	before turning on the projector. (Refer to "CONNECTING
	PROJECTOR" on page 11~13.)
2	Connect the projector's AC Power Cord into an AC outlet. The
	LAMP Indicator lights red, and the READY Indicator lights green.
	NOTE : When “On start” function is ON, this projector is turned
	on automatically by connecting AC Power Cord to an
	AC outlet. (Refer to the menu item "On start" on page
	37.)
3	Press the POWER ON-OFF button on the Top Control or on the
	Remote Control to ON. The LAMP Indicator dims, and the

Cooling Fans start to operate. The Preparation Display appears on the screen and the count-down starts.

26

The Preparation Display disappears after 30 seconds.

Lamp mode

4	The input source that was selected last and the Lamp mode
	status icon appears on the screen after the count-down. The

signal from PC or Video source appears after 30 seconds.

*Refer to page 37 for the Lamp mode.

TURNING OFF PROJECTOR

1	Press the POWER ON-OFF button on the Top Control or on the
	Remote Control, and a message "Power off?" appears on a
	screen.
2	Press the POWER ON-OFF button again to turn off the
	projector. The LAMP Indicator lights bright and the READY
	Indicator turns off. After the projector is turned off, the Cooling
	Fans operate (for 90 seconds).
3	When the projector has cooled down, the READY Indicator lights
	green again.

NOTE : The projector cannot be turned on during cooling period with the READY Indicator off. You can turn it on again after the READY Indicator lights green.

TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

DO NOT DISCONNECT AC POWER CORD BEFORE READY INDICATOR LIGHTS GREEN.

Power off?

The message disappears after 4 seconds.

note on operation

When “Power management” function is ON, the projector detects signal interruption and turns off the Projection Lamp automatically. Refer to “Power management” on page 37.

When the WARNING TEMP. indicator flashes red, the projector is automatically turned off. When the temperature inside the projector returns to normal, the READY indicator lights green. Then you can turn the projector back on. The WARNING TEMP. indicator stops flashing after turning the projector on.

When the WARNING TEMP. indicator continues to flash after turning the projector back on, refer to the section "MAINTENANCE" on page 41 and proper maintenance should be taken.

19