Activating the Surround/DSP modes
Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. For details, see page 30.
Activating one of the Surround/DSP modes automatically recalls the memorized settings and adjustments.
•To adjust the speaker output level, see page 23.
•To adjust the effect level for the DSP mode (except All Channel Stereo mode), see page 23.
•To add “wraparound” sound effect to “PLII MUSIC” (PANORAMA control), see page 23.
•To adjust the sound localization of the center channel for “NEO:6 MUSIC” (center gain), see page 24.
NOTES
•You cannot use any Surround/DSP modes when selecting “DVD MULTI” as the playback source.
•You cannot select All Channel Stereo mode if the surround speakers are set to “NO” in the speaker setting (see page 18).
If “AUTO SURRND (Auto Surround)” is set to “ON”
You can enjoy Surround mode simply by playing back multi- channel software (with digital input selected for that source). To activate Auto Surround, see page 21.
From the remote control:
1
When operating the receiver using the remote control, set the mode selector to “AUDIO/TV/VCR/DBS.”
2
1Select and play any source other than “DVD MULTI.”
•Make sure you have selected the input mode (analog or digital) correctly.
2Press SURROUND repeatedly to select the Surround/DSP mode you want.
Ex.: When “DOLBY D” is selected for Dolby Digital multi- channel software:
EQ C.TONE | VIRTUAL SB AUDIO P. BASS | TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE | |||||||
LPCM | L |
| C |
| R |
| PL | ATT | |
DOLBY D | S . WFR LFE | NEO : 6 | HP | ||||||
DTS AAC |
|
|
|
|
|
| DSP 3D | MHz | |
LS | SB | RS | |||||||
96 / 24 | AUTO SR | kHz | |||||||
|
|
|
|
|
|
|
|
|
To cancel Surround/DSP modes
Press SURROUND repeatedly so that “SURRND OFF” appears on the display.
On the front panel:
2 | 1, 3 |
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
1Select and play any source other than “DVD MULTI.”
•Make sure you have selected the input mode (analog or digital) correctly.
2Press SURROUND.
MULTI JOG now works for selecting Surround/DSP modes.
3Turn MULTI JOG to select the Surround/DSP mode you want.
Ex.: When “DOLBY D” is selected for Dolby Digital multi- channel software:
EQ C.TONE | VIRTUAL SB AUDIO P. BASS | TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE | |||||||
LPCM | L |
| C |
| R |
| PL | ATT | |
DOLBY D | S . WFR LFE | NEO : 6 | HP | ||||||
DTS AAC |
|
|
|
|
|
| DSP 3D | MHz | |
LS | SB | RS | |||||||
96 / 24 | AUTO SR | kHz | |||||||
|
|
|
|
|
|
|
|
|
To cancel Surround/DSP modes
Turn MULTI JOG so that “SURRND OFF” appears on the display.
Creating realistic sound fields
31