JVC RX-F10S manual Basic setting items

In the following cases, set the speakers manually.

•When the receiver detects the sound but as “SILENT” twice in succession.

The setting is made. (The distance of the speakers from which sound has not been detected is set to “+9.0m (+30ft).”)

The receiver exits from Smart Surround Setup.

•When the receiver fails to detect the sound three times.

“MANUAL” appears on the display. The receiver exits from Smart Surround Setup.

To cancel Smart Surround Setup, press SMART SURROUND SETUP while “SETTING UP” flashes on the display.

•No other operations can be accepted after “SETTING UP” stops flashing. Complete the Smart Surround Setup.

To check the setting made by Smart Surround Setup, press SMART SURROUND SETUP while the receiver is in normal operation mode.

The setting values appear one after another (see page 16).

•If you have changed speaker distance and/or output level manually after using Smart Surround Setup, “MANUAL” appears.

•If you have not used Smart Surround Setup, “NO S.S.S.” appears.

NOTES

•The speaker distance and output level manually set will be applied instead of those set by using Smart Surround Setup in the following cases:

–When you change one of the speaker distance (see page 19).

–When you change one of the speaker output level (see page 23).

–When you change one of the speaker size either from “NO” to “SML” or “LRG,” or from “SML” or ”LRG” to “NO” (see page 18).

•When you want to adjust the speaker distance and output level manually, see pages 19 and 23.

•Do not clap your hands so hard that it may hurt your hands.

Basic setting items

You can adjust the following items. See pages in parentheses for details.

•You cannot select the items which is not available with the current setting.

Items	To do
SUBWOOFER	Register your subwoofer. (18)
FRONT SPK	Register your front speaker size. (18)
CENTER SPK	Register your center speaker size. (18)
SURRND SPK	Register your surround speaker size. (18)
S BACK SPK	Register your surround back speaker size.
	(18)
DIST UNIT	Select the measuring unit for the speaker
	distance. (19)
FRNT L DIST*	Register the distance from the left front
	speaker to your listening point. (19)
FRNT R DIST*	Register the distance from the right front
	speaker to your listening point. (19)
CENTER DIST*	Register the distance from the center speaker
	to your listening point. (19)
SURR L DIST*	Register the distance from the left surround
	speaker to your listening point. (19)
SURR R DIST*	Register the distance from the right surround
	speaker to your listening point. (19)
S BACK DIST*	Register the distance from the surround back
	speaker to your listening point. (19)
SUBWFR OUT	Select sounds emitted from the subwoofer.
	(19)
EX/ES	Select the EX/ES reproduction mode. (20)
DUAL MONO	Select the Dual Mono sound channel. (20)
CROSS OVER	Select the cutoff frequency to the subwoofer.
	(19)
LFE ATT	Attenuate the bass (LFE) sounds. (19)
MIDNIGHT M.	Reproduce a powerful sound at night. (20)
DIGITAL IN1	Select the component connected to the digital
	coaxial terminal—1(DVR/DVD). (21)
DIGITAL IN2	Select the component connected to the digital
	optical terminal—2(DBS). (21)
DIGITAL IN3	Select the component connected to the digital
	optical terminal—3(VCR). (21)
AUTO SURRND	Select Auto Surround mode. (21)
DVD VIDEO	Select the type of video terminal used for the
	DVD recorder or DVD player. (21)
VCR VIDEO	Select the type of video terminal used for the
	VCR. (21)

*If you have used Smart Surround Setup on page 16, these settings are not required.

English

Basic settings

CONTINUED ON THE NEXT PAGE

17