JVC RX-F10S manual Connecting video components, Ç Î ‰ Ï Ì, Getting

Connecting video components

Do not connect the AC power plug to the wall outlet until all connections are completed.

This receiver is equipped with the following video terminals— composite video, S-video, and component video terminals.

•If your video components have S-video (Y/C-separation) and/or component video (Y, PB, PR) jacks, connect them using an S- video cable (not supplied) or component video cable (not supplied). By using these terminals, you can get a better picture quality in the order:

Component > S-video > Composite

IMPORTANT:

The video signals from one type of these input jacks are transmitted only through the video output jacks of the same type. Therefore, if a recording video component and a playing video component are connected to the receiver through the video terminals of different type, you cannot record the picture. In addition, if the TV and a playing video component are connected to the receiver through the video terminals of different type, you cannot view the playback picture on the TV.

Turn off all components before making connections.

•When you connect other components, refer also to their manuals.

DO NOT use a TV through a VCR or a TV with a built-in VCR; otherwise, the picture may be distorted.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

If your video components have AV COMPU LINK terminal

See also page 32 for detailed information about the connection

and the AV COMPU LINK remote control system.

started

7Connecting a DVD recorder or DVD player with its stereo output jacks:

Red

Getting

AUDIO

L

R

DVR DVR/DVD

OUT (REC) IN (PLAY)

White

Stereo audio cable (not supplied)

White

Red

OUT VCR (REC)

Å	ı	DVD recorder or
		DVD player

Ç Î ‰ Ï Ì

Y	PB	PR	VIDEO	Composite video cable
MONITOR				(not supplied)
OUT

DVR/DVD

IN

VCR	DVR	DVR/DVD	OUT VCR
IN	OUT (REC)	IN (PLAY)	(REC)

COMPONENT VIDEO S-video cable (not supplied)

Green Blue Red

Component video cable (not supplied)

NOTE

When connecting a DVD recorder or DVD player to the component video input jacks, make the component video input setting (DVD VIDEO) correctly for AV COMPU LINK remote control system. See page 21 for details.

ÅTo left/right audio channel output

ıOnly for DVD recorder: To left/right audio channel input

ÇOnly for DVD recorder: To composite video input Î To composite video output

‰ To S-video output

Ï Only for DVD recorder: To S-video input

Ì To component video output

•Connect Y, PB, and PR correctly.

7